Methane conversion to C2 hydrocarbons in solid electrolyte membrane reactors

Solid electrolyte membrane reactors (SEMRs) have been used to both study and influence catalytic reaction rates. Methane coupling is the reaction most thoroughly and intensively studied in these membrane reactors. In the last 20 years, oxygen ion (O²⁻), proton (H⁺) and mixed (O²⁻-e⁻, H⁺-e⁻) conducting membranes have been tested in order to maximize the conversion of methane to C₂ compounds. The present review contains the fundamental operating principles of the various SEMR types and their applications in this reaction. The difficulties that should be overcome in order to promote this SEMR process to an industrial scale are discussed.     

甲烷氧化偶联Ti-La-Li系多元氧化物催化剂的表面碱性和表面活性氧种

利用ＣＯ２－ＴＰＤ方法考察了Ｔｉ－Ｌａ－Ｌｉ系多元氧化物催化剂的表面碱性，实验发现：Ｃ２选择性与表面碱强度呈顺变关系，而ＣＨ４转化率与ＣＯ２的脱附峰面积呈顺变关系。同时，利用ＸＰＳ，Ｏ２－ＴＰＤ等方法对该体系催化剂的表面活性氧种进行了表征与研究。结果表明：催化剂的表面晶格氧与Ｃ２选择性有关，表面吸附氧与甲烷转化（包括偶联和深度氧化）有关。Ｏ２－ＴＰＤ实验发现催化剂的表面存在三种氧。α（１００℃≤ｔ     

Capillary electrophoresis determinative and GC-MS confirmatory method for water-soluble organic acids in airborne particulate matter and vehicle emission

Urban fine airborne particulate matter (PM2.5) and vehicle emission samples were studied for water-soluble low-molecular-weight carboxylic acids using CE with indirect UV detection. Further identification of these acids was achieved using GC-MS as their butyl esters (after derivatization with BF3/butanol). Several dicarboxylic acids in the range C2-C10 including straight-chain, branched-chain, cis- and trans-unsaturated, and aromatic acids were confirmed by GC-MS. In addition, aromatic acids such as benzoate, phthalate, terephthalate, isophthalate, and 4-methylphtalate were present in such samples, but some of these were not well resolved by the used CE method. Oxocarboxylic acids (Cn(w) with n > 4) were also identified by GC-MS but not determined by CE due to lack of standards. The rapidity and simplicity of the CE method were clearly demonstrated, and the method was observed to be advantageous for routine monitoring of water-soluble organic acids in airborne PM2.5 and vehicle emission at low microg/L levels.     

CH4, CO2和H2O在非金属原子修饰石墨烯表面的吸附

煤层气(矿井瓦斯)是一种有望替代传统化石燃料，如煤、石油和天然气的非常规气体. 作为可得的清洁能源，它的利用被认为是节能和经济的选择. 在本工作中，非金属原子X(X=H，O，N，S，P，Si，F，Cl)修饰的石墨烯(Gr)被用来代表具有结构异性的煤表面模型. 通过密度泛函理论系统地研究了煤层气组分Y(Y=CH₄，CO₂，H₂O)在非金属原子修饰石墨烯上的吸附作用. 结果表明Y在非金属原子修饰石墨烯上的吸附均为物理吸附. 态密度和差分电荷密度共同表明了这种弱的相互作用.其中，H和Cl对CH₄的作用较大； N、O、F、Cl对CO₂的作用较强； N，Cl对H₂O的影响不容忽视. 总的来说，吸附能大小依次为：H₂O>CO₂>CH₄. 因此，在CH₄富集的煤层里注入H₂O或CO₂可以与CH₄形成竞争吸附，进而提高煤层气采收率. 本工作提供了在分子水平下煤层气与非金属原子修饰石墨烯之间的相互作用的详情，并为煤层瓦斯的开采与分离提供了有用的信息.     

Methanol Suppression of Trichloroethylene Degradation byMethylosinus trichosporium (OB3b) and Methane-Oxidizing Mixed Cultures

The effect of methanol on trichloroethylene (TCE) degradation by mixed and pure methylotrophic cultures was examined in batch culture experiments. Methanol was found to relieve growth inhibition ofMethylosinus trichosporium (OB3b) at high (14 mg/L) TCE concentrations. Degradation of TCE was determined by both radiolabeling and gas chromatography techniques. When cultures were grown on methanol over 10 to 14 d with 0.3 mg/L TCE, OB3b degraded 16.89 ±0.82% (mean± SD) of the TCE, and a mixed culture (DT type II) degraded 4.55±0.11%. Mixed culture (JS type I) degraded 4.34±0.06% of the TCE. When grown on methane with 0.3 mg/L TCE, 32.93±2.01% of the TCE was degraded by OB3b, whereas the JS culture degraded 24.3 ±1.38% of the TCE, and the DT culture degraded 34.3 ±2.97% of the TCE. The addition of methanol to cultures grown on methane reduced TCE degradation to 16.21 ±1.17% for OB3b and to 5.08±0.56% for JS. Although methanol reduces the toxicity of TCE to the cultures, biodegradation of TCE cannot be sustained in methanol-grown cultures. Since high TCE concentrations appear to inhibit methane uptake and growth, we suggest the primary toxicity of TCE is directed towards the methane monooxygenase.     

A novel process for anaerobic composting of municipal solid waste

A novel process has been developed and evaluated in a pilotscale program for conversion of the biodegradable fraction of municipal solid waste (MSW) to methane via anaerobic composting. The sequential batch anaerobic composting (SEBAC) process employs leachate management to provide organisms, moisture, and nutrients required for rapid conversion of MSW and removal of inhibitory fermentation products during start-up. The biodegradable organic materials are converted to methane and carbon dioxide in 21–42 d, rather than the years required in landfills.     

Catalytic Combustion of Methane over Ti-Pillared Clay Supported Copper Catalysts

A natural montmorillonite, produced from Laiyang of Shandong Province, was pillared by Tipolycations to form Ti-pillared clay (Ti-PILC), and characterized by BET surface area, infrared spectra and thermal analysis. The characterization results show that Ti-PILC has a larger surface area and more hydroxyl groups than that of the natural clay, thus was used as the catalytic carriers to prepare supported Cu catalysts (Cu/TiopILC). The 20%Cu/Ti-PILC with 10mmol/g of Ti/clay shows a high catalytic performance of methane combustion in the temperature range of 400-500℃.     

不同垃圾焚烧炉排放的PM10 中多环芳烃的研究

对大气可吸入颗粒物采样器进行改装，建立了垃圾焚烧炉烟气中PM10采样系统，并采集了三家垃圾发电厂焚烧炉排放烟气中的可吸入颗粒物。利用GC-MS对可吸入颗粒物中的16种多环芳烃进行定量研究，获得了多环芳烃的质量分数和浓度，并对不同环数的芳烃进行了比较，分析了不同样品中的多环芳烃的毒性参数。结果表明，颗粒物中的多环芳烃主要集中在4环、5环和6环，3环和2环所占比例较少；与燃煤电厂相比，垃圾焚烧发电厂排放的烟气中多环芳烃的浓度和毒性参数更高。     

Bis(cyclopentadienyl)methan-verbrückte Zweikernkomplexe,V. Heteronukleare Co/Rh-, Co/Ir-, Rh/Ir- und Ti/Ir-Komplexe mit dem Bis(cyclopentadienyl)methan-Dianion als Brückenliganden

Bis(cyclopentadienyl)methane-bridged Dinuclear Complexes, V^[1]. – Heteronuclear Co/Rh-, Co/Ir-, Rh/Ir-, and Ti/Ir Complexes with the Bis(cyclopentadienyl)methane Dianion as Bridging Ligand^* The lithium and sodium salts of the [C₅H₅CH₂C₅H₄]^- anion, 1 and 2 , react with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [Ir(CO)₃Cl]n to give predominantly the mononuclear complexes [(C₅H₅-CH₂C₅H₄)M(CO)₂] ( 3, 5, 7 ) together with small amounts of the dinuclear compounds [CH₂(C₅H₄)₂][M(CO)₂]₂ ( 4, 6, 8 ). The ¹H- and ¹³C-NMR spectra of 3, 5 , and 7 prove that the CH₂C₅H₅ substituent is linked to the π-bonded ring in two isomeric forms. Metalation of 5 and 7 with nBuLi affords the lithiated derivatives 9 and 10 from which on reaction with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [C₅H₅TiCl₃] the heteronuclear complexes [CH₂(C₅H₄)₂][M(CO)₂][M′(CO)₂] ( 11–13 ) and [CH₂(C₅H₄)₂]-[Ir(CO)₂][C₅H₅TiCl₂] ( 17 ) are obtained. Photolysis of 11 and 12 leads almost quantitatively to the formation of the CO-bridged compounds [CH₂(C₅H₄)₂][M(CO)(μ-CO)M′(CO)] ( 14, 15 ). According to an X-ray crystal structure analysis the Co/Rh complex 14 is isostructural to [CH₂(C₅H₄)₂][Rh₂(CO)₂(μ-CO)] ( 16 ).     

Performance characteristics of suspended particulate reagent-iminodiacetate as a binding agent for diffusive gradients in thin films

The performance characteristics of an alternative binding agent, suspended particulate reagent-iminodiacetate (SPR-IDA), for use with DGT methodology were investigated. The parameters investigated during this study included gel hydration, blank levels, elution factor (f_e), capacity, the effects of pH on the binding of trace metals by DGT. The novel application of this resin for use as a quantitative standard for laser ablation ICP-MS was also evaluated. To further constrain the results for the SPR-IDA binding agent, parallel experiments were performed using resin gel containing Chelex 100, which has been widely reported in the literature. Hydration results showed that the SPR-IDA resin gel reached a stable dimension and weight within ∼30 min and was dimensionally stable for ≤6 months. The measured DGT blanks for the SPR-IDA resin were 0.0023, 0.15, 0.21, 0.0033 and 0.011 ng disc⁻¹ for Co, Ni, Cu, Cd and Pb, respectively. The elution factor differed for the two resin types with the Chelex 100 recoveries slightly lower than previous reports and the SPR-IDA resin showing on average ∼5-9% better recoveries than DGT containing Chelex 100. The measured capacity of DGT discs containing the SPR-IDA binding agent was 0.26 mg Cd, similar to the calculated value of 0.29 mg Cd, indicating the entire resin layer was available for metal uptake.Both resin types performed equally well when deployed in 1 mM NaNO₃ solutions with DGT measurements of ∼100% of direct solution measurements for Co, Ni and Cd. However, DGT measurements of Cu and Pb systematically decreased with increasing solution pH down to ∼50% of solution values at pH 8.0, due to artifacts resulting from colloid formation during the addition of the metals. This was remedied by adding the metals as dilute salt standards and addition of Mg(NO₃)₂ to eliminate adsorption to the container walls. In the latter experiments, DGT measured concentrations of Co, Ni, Cu, Cd and Pb were in agreement with solution concentrations. Deployment of DGT in solutions with increasing concentrations of trace metals yielded linear results, suggesting that quantitative analysis using simplified laser ablation techniques should be possible using this newly characterized SPR-IDA resin gel.